Category: Hardware

The Rocksmith Cable and PC

On 23rd May 2021

In Application, Computing, Driver, Hardware, Software, USB

Having finally repaired the stratocaster input jack, I decided to take it for a test drive as my first venture into Rocksmith on the Dell PC.

Guess what? Rocksmith told me the cable wasn’t connected. Aw, man!!

I spent most of the afternoon debugging this. I updated all kinds of drivers and GEForce Experience, tried to update Direct X run time module(s),¹⁾Apparently I had the latest version already. updated the BIOS with a flash, ²⁾All the while holding my breath!, tried all four USB 2.0 ports, for good measure tried USB 3.0 too,³⁾Apparently the cable isn’t compatible with those, which may be dubious information, but as it wasn’t working anyway …. and finally tried a powered USB hub. Nothing doing.

So then I installed the Discord app and posted a query on the CustomsForge channel. Apparently power issues are the most common cause of the so-called Code 10 error I was getting⁴⁾This is visible from the Device Manager, by the way. but I’d already tried that.

While I awaited a reply, in total despair I tried the other ports on the powered USB hub. It turns out that the one nearest the power supply input worked!!

This sounds like a potentially unstable solution, so I’ll likely obtain another powered USB hub if someone gets back to me regarding that.

Notes[+]

Notes
↑1	Apparently I had the latest version already.
↑2	All the while holding my breath!
↑3	Apparently the cable isn’t compatible with those, which may be dubious information, but as it wasn’t working anyway ….
↑4	This is visible from the Device Manager, by the way.

Epson Slide Scanner

By Karljürgen Feuerherm

On 16th May 2021

In Application, Computing, Hardware, Software

Today, as my left calf was giving me considerable grief following yesterday’s rope skipping incident, I decided to do ‘relaxing’ things. Setting up the slide scanner which arrived a few weeks ago seemed a good idea.

It’s pretty clear that the instructions were written in the dark ages and never updated; they referred to Windows 7 and Windows 8; problem resolution suggested verifying that the computer was USB-compatible (after suggesting one make sure the thing was in fact plugged into a USB port!), etc. I can only assume that they are in competition with HP for the Tech Darwin Award of the Century.

Minimal instructions on set-up and a CD-ROM. Going to the Epson on-line site did provide a download option, so did that.

Then spent a frustrating half hour trying to get the thing to even come on. Got the voltage tester out to make sure there was in fact juice coming out of the adapter, and yes indeed, there was. That’s when I discovered the ‘On’ switch cleverly hidden on the right side of the unit, near the back, in a recessed cavity. That would explain why there was nothing obvious on the front, and I had to revise my initial assumption that the thing must just always be on.

It took me another hour to figure out how to scan slides. Pushing the buttons on the front of the unit as suggested in the instructions did nothing whatsoever. I thought that this being Hell—pardon me, Windows—maybe I had to reboot to activate the driver. Uh, no. Ok, let’s do it the other way and run the software from the computer end.

I kept being told that no document was found. I assumed that the fault lay in my scanner setting choices, none of which was ‘slide’, ‘diapositive’, or the like. It turns out that I’d placed the slide holder the wrong way around onto the scanner bed. I must take the blame for not having used a microscope to check the details in the image in the instructions; mea maxima culpa!

Finally got that sorted out, and found that the ‘scan’ option was greyed out until I’d done ‘preview’ first. My apologies; I haven’t visited the 50s in some time. I then discovered that *after* the preview the button on the front of the scanner worked. Um, ok, but if they force me to start at the computer end, what’s the point? I assume that there’s something I’m missing somewhere. Time to submit a ticket to the support animals … again ….

I pulled four slides from an arbitrary Paximat¹⁾A projector which I inherited; the slides are placed into long plastic container which are then placed into the projector. box; I noticed that that particular part of the box was labelled ‘Wittelbach’ and that the slides themselves were dated to various days in September 1995.²⁾By the way, I adopted a convention for labelling the slides according to where I get them from; in this case PM-01-YYMMDD, where ‘PM-01’ refers to ‘Paximat Magazin 01’ and ‘YYMMDD’ refers to the date on the slide. If slides are undated I’ll come up with something else (like the slot number) and where there are multiple slides for a given day I’ll just add a numeric suffix.

This process (even at 300 DPI) is low as molasses in January in the Antarctic. Anyway, here are the results of the first attempt.

Notes[+]

Notes
↑1	A projector which I inherited; the slides are placed into long plastic container which are then placed into the projector.
↑2	By the way, I adopted a convention for labelling the slides according to where I get them from; in this case PM-01-YYMMDD, where ‘PM-01’ refers to ‘Paximat Magazin 01’ and ‘YYMMDD’ refers to the date on the slide. If slides are undated I’ll come up with something else (like the slot number) and where there are multiple slides for a given day I’ll just add a numeric suffix.

New Dell G5 initial set-up

By Karljürgen Feuerherm

On 9th April 2021

In Computer, Computing, Hardware

On 7 April 2021, my new Dell G5 5000 computer arrived, and I couldn’t help myself, I just had to boot it up and do some configuration.

Beside the obvious Windows 10 stuff, I installed the following:

PeaZip (free zip/unzip software; seems to work well enough)
Steam
Rocksmith 2014 and Sunless Sea (Steam games)
CustomsForge Song Manager
Editor on Fire 18RC12 (updated with Hotfix 20-09-26)
Rocksmith Custom Song Toolkit 2.9.2 (rev a60453fa), and
Firefox, which I set to the default browser.

For the time being, I have it connected to my old Philips 27″ monitor, but if and when needed, I can connect the Philips 33″ 4k monitor which is now attached to my MacBook Pro.

Then I powered it down and unplugged it as I didn’t have a suitable power bar and surge protector and didn’t wish to take any risks!

This will be my development machine for the PC side of the house, as well as my primary leisure activity machine going forward.

Keyboard and trackpad issues

By Karljürgen Feuerherm

On 30th November 2020

In Keyboard (Bluetooth), Keyboard (built-in), Trackpad (Bluetooth)

Original problem description

Recently, I have been experiencing problems with my ergonomic Bluetooth keyboard¹⁾Microsoft Surface as Apple doesn’t offer one. and my Magic Trackpad 2.

The keyboard has been unavailable at boot-up since, say, a week or two (prior to updating from Catalina to Big Sur, which I’ve just done) .²⁾I understand that non-Apple products can be expected to take a little longer to be recognized—though I don’t know why—but it makes no difference how long I wait. Once I’ve logged in, it becomes available without further problem and functions normally. The trackpad, on the other hand—also a Bluetooth advice, but Apple-made, obviously—is available as soon as I attempt to use it but is intermittently sluggish after boot-up. In the latter case, the problem seems to have begun with the move to Big Sur.

The following solutions have been proposed by Apple:

increase the tracking speed on the trackpad
unpair and repair the devices
charge the trackpad to 100%
enter Safe Mode and see whether the problems persist
reset SMC and NVRAM
consult the following articles:
1. if your Apple … trackpad isn’t working … as expected, and
2. if your pointer is jumpy when you use a … Magic Trackpad ….

Solution attempts, pass one

I have so far attemped solution ##1, 2, and 3, as well as the first step described with regards to resetting SMC (viz., holding the power button down 10 seconds, then booting up) for the trackpad, so far without any improvement to trackpad erratic behaviour.

I am delaying doing the attempt with the keyboard as I have in the past found pairing the Microsoft Surface keyboard to be difficult, and, as I’m in the middle of my teaching term, can’t afford the problems which would ensue should the keyboard not repair. I’ll fiddle with this at end of term should the issue persist. (It is, after all, not that big a deal to enter the boot-up password on the built-in keyboard, as I don’t use a docking station.)

New problem: built-in keyboard

This morning (ca. 5:15 am), I experienced a new problem at boot-up: I was unable to enter the password at boot-up. It was not just invisible, the keys were not registering at all!

I powered down and rebooted, to no avail. Eventually, I was offered the cryptic advice that I should reboot which would put me into Recovery Mode, where I could address the issue.

I did so, and thanks to the trackpad, was able to choose a bullet-point option corresponding to non-functional keyboard, and was then invited to turn off FileVault. As I had no other choice, I did that, and was able to log in normally.

What is that all about? I posted an update to my Apple contact through the messaging system as this is not only worrisome but potentially related to the problems noted above.

Solution attempts, pass two

After today’s two lectures, I decided to shutdown the machine and continue the SMC reset procedure (shut-down, hold left-control, left-alt, right-shift for 7 seconds, then press the power button, hold for another 7 seconds). The Mac booted up, and the Bluetooth keyboard was available to type the password!

This was not quite what the script predicted: I was supposed to push the power button myself after the second set of 7 seconds to boot up the machine. So I shut the machine down again, waited a few seconds to be sure it was good and truly shut down, then powered it up again.

The Bluetooth keyboard was still available for log-in. So it looks like I’ve licked the Bluetooth keyboard part of the issue, but I’ll keep an eye on it to be sure. Let’s also see whether the trackpad behaves any better now.

Update

After a few days, the Bluetooth keyboard continues to be available at boot-up, however the trackpad continues to be erratic.

I read the two articles recommended above by Apple, but found nothing there which was relevant and which I’d not already tried.

I tried booting up in Safe Mode. As far as I could see, the trackpad functioned normally; but unfortunately, I couldn’t do any real work in that mode (besides the fact that everything else performed poorly) so it didn’t prove to be much of a diagnosis. When I rebooted normally, the trackpad behaviour was as bad as ever. Incidentally, I did turn it off and on again, as I’d heard that this sometimes makes a difference, but it did not.

Finally, I reset NVRAM as well. No change.

Current state of affairs

Here’s where we stand, at present:

The reset of the SMC cured the Bluetooth keyboard not being available prior to login.
Nothing made any difference to the trackpad issue. It works most of the time, and drags occasionally. As far as I can see, this behaviour coincides with the upgrade to Big Sur, so it’s either a Big Sur issue, or coincidence,³⁾Which does happen; it turns out that this was the case with my last problem, as it happens. or a hardware issue. The trackpad is only a few months old, so I’m inclined to one of the two software issues for the moment, but if we can’t fix it, then … whatever remains (hardware), however unlikely, must be the truth!⁴⁾That said, having temporarily paired the old Magic Trackpad and disabled the new one made no difference either, so I think we can eliminate the trackpad hardware.
I would really like to know why the laptop’s built-in keyboard failed to respond, and what on earth turning off FileVault had to do with it?⁵⁾This also suggests to me a software issue on the previous point. And I would add that occasionally, I seem to sense a lag in the Bluetooth keyboard response, as well, though that is much less obvious than the trackpad issue, which is glaring.

Two other things which one might try:

Disable OneDrive. Typically, there is very little going on in the OneDrive space, but it does poll regularly so this may be worth a shot.
Turn off wi-fi, since it is only needed for AirDrop; otherwise, internet is provided by ethernet to router. I have been told in the past that having both active can lead to potential issues.

No cigar.

Chat with Apple

My support person called back on Saturday, 5 December. Apparently, we’ve pretty much covered all possibilities, with the exception of re-installing Big Sur or wiping the system and re-installting Big Sur and the file system from backups.

She was skeptical of the value of this, as that was done recently, towards the tail end of the Catalina OS. I indicated that I could try the first option at some point when I had some time available, but as for the latter, that would have to wait until end of term, since it would be long and tedious and impracticable in the mean time.

I have tried neither of these—yet.

Another internet search

I’m not the only one with Bluetooth problems, it seems; there are many reports of Bluetooth audio problems, but I haven’t tried audio, though maybe I should, just to see?

One site suggested deleting the associated plist file, so I decided to try that. Apple had suggested a similar procedure for one of my earlier problems, after all.

Navigate to /Library/Preferences
Delete or move com.apple.Bluetooth.plist⁶⁾I opted to rename it to com.apple.Bluetooth-old.plist.
Restart, and
Reconnect the Bluetooth devices.

I’ve now (December 7, 6 am) done that.

Notes[+]

Notes
↑1	Microsoft Surface as Apple doesn’t offer one.
↑2	I understand that non-Apple products can be expected to take a little longer to be recognized—though I don’t know why—but it makes no difference how long I wait.
↑3	Which does happen; it turns out that this was the case with my last problem, as it happens.
↑4	That said, having temporarily paired the old Magic Trackpad and disabled the new one made no difference either, so I think we can eliminate the trackpad hardware.
↑5	This also suggests to me a software issue on the previous point. And I would add that occasionally, I seem to sense a lag in the Bluetooth keyboard response, as well, though that is much less obvious than the trackpad issue, which is glaring.
↑6	I opted to rename it to com.apple.Bluetooth-old.plist.

External monitor blank

By Karljürgen Feuerherm

On 14th November 2020

In Computing, Display, Hardware

For the last few days, my Philips external monitor has not come on when I’ve booted up my MacBook Pro in the morning.

Oddly, I discovered more or less by accident¹⁾During my last hardware debugging session, I had moved the power cable from a port on the right to a port on the left. But remembering that apparently having it on the left can result in overheating, I moved it back to the other side. that if I unplugged the HDMI to USB-C adapter and moved it to a different port, the display would spring to life. Ok … that’s at best a work-around, not a solution—as I indeed found out later.

First round of debugging

Things I tried in order to resolve the issue:

unplugging and replugging the monitor
unplugging and replugging the adapter
replacing the HDMI cable
rebooting the computer
rebooting the computer in Safe Mode
rebooting the computer to reset the SMC
rebooting the computer to reset the NVRAM
reinstalled macOS Catalina (a 55 minute operation on rural internet), and
a few other things I can’t recall just now, but which I’ll add here if I think of them later.

Apple Support, take one

I contacted Apple Support under my Apple Care plan, and once I’d convinced the person at the other end that I’d tried all this, I was escalated to a senior adviser who had me do the following:

delete two files of the form com.apple.windowsserver*.plist,²⁾One was in my home settings, one was global; unfortunately, even though I’d saved this information, it was lost in the steps which follow. and
reboot.

He was confident this would solve the problem. He was wrong.

He had told me that if that didn’t work I could escalate to Apple Engineering, and he’d put a note on the case to that effect, but warned me I’d have to use the phone for that, rather than chat (likely due to the reboots I’d be likely to have to perform?). So I called in again.

Apple Support, take two

Asked to escalate to Apple Engineering. Whether that’s what they did or not, I don’t know. In any event, the new person reviewed the whole business with me and agreed that since this started happening right after the last patch to Catalina 10.15.7,³⁾Again, I had the code stored, but lost that …. it was likely an operating system issue and a restore to a previous point could prove that.

Unfortunately, the last time I contacted Apple (to get my input method for cuneiform running again), the solution, which involved resetting the SMC and NVRAM, inadvertently put my back-up system off-line, which I was unaware of until 10 days later when my system kindly informed me that I hadn’t done back-ups in 10 days!⁴⁾I will try to post on that shortly if I have the time, then come and back-fill this post with the link. So this left with me only two options: backing up to October 25th (a long way back from ‘today’, which at the time was November 12th), or to November 10th;⁵⁾I think. Thanks to everything I’ve done since, and my poor memory, it’s hard to be sure. I opted for the latter as the less painful option.

Keeping in mind that I’d only just experienced a loss of back-up system, this was not the most comforting solution—and maybe a bit like dropping an atom bomb to kill a mosquito—but I didn’t like the idea of living with the problem, so in for a penny, in for a pound ….

Started the back-up. ETA to completion: 40 hours. Ok, so we know that’s likely an over-estimate based on insufficient experience, and likely to go down, but still.

As there was no point the support person sitting around for hours, she sent me an email so I could let her know when it was done and we could resume debugging, if and when. My options were to reply to the email with text or to click on a link in the email to go to an Apple messaging site where I could leave a voice message of up to 5 minutes. Good.

On my own

I monitored it regularly, with my heart in my mouth; indeed, the ETA dropped more and more rapidly, so it looked like it might finish around midnight. At 8 pm or so, I saw that it had recovered 605 GB or so and had 4 hours to go. Unfortunately, at 9, I saw the same thing.

This is when you have a serious decision to make, based on the undecidability problem: when an algorithm halts, you know it halts (and has either done what it should or not); but when it’s still running, it may halt in future, or it may not. We were in the second part of undecidability, and it certainly looked like the thing was stuck. So, decision time:

cancel and restart, in the hope of a new restore not getting stuck, and getting done by morning, or
leave it alone and hope.

I chose door #2.

Good call; it finished around 10 pm, at which point I set about the task of tidying up a variety of little things, including turning off automatic updates in System Preferences and automatic back-ups in Time Machine, as a precaution, so nothing would get clobbered inadvertently before I’d had a chance to confer with the Apple Support advisor.

Apple Support, take three

I dutifully opened the email from the Apple advisor and the first thing I noticed was that although she reiterated that I could just reply to the email, it actually came from noreply@apple.com. This was not encouraging, to say the least, but I sent an update anyway.

Then I clicked the link. I won’t go into the gory details, but over the next day and a half I have experienced

a spinning ticker indicating that it’s stuck in la-la land
a request to sign in with my Apple ID, following which I get a 403 Forbidden
a successful landing at the message page, upon which I enter my updated information, press submit, and am informed that I cannot submit at this time, please try again later.

Repeat ad nauseam; the last is the least frequent occurrence.

Fortunately, she said she’d contact me next time she was in the office. Her office days being listed as Tuesday through Saturday, I expected a call Friday. I didn’t get one. I also didn’t get one today, Saturday (office hours start at 10:00 and it’s now 13:13).

Short version: there is no Apple Support, take three.

On my own, again

This left me wondering what to do next, as I was facing another undecidability problem, the algorithm this time being ‘response from Apple Support’. I decided to instal Big Sur, since going backwards had done no good ….

Step one: perform a back-up

Ordinarily, I take my life in my hands and just do it. But, having run out of ordinary feelings, I decided to do the Right Thing and perform a back-up.

Enter Time Machine, start backup. Back-up disc not found.

Say what? no, not the Hot-knife Boogie. The RAID drive was asleep. I haven’t yet figured out how to wake it up gently, so I did the violent thing and powered it off, then on again. And guess what ….

The external monitor came on.

Now, the external monitor is plugged into the same adapter as the RAID USB cable, so presumably there’s a connection (no pun intended) but I’m not sure what. It could still be some kind of software bug, or it could be the adapter, but that seems less likely under the circumstances.⁶⁾I did order a replacement/spare from Amazon yesterday, for two reasons: a) an on-line order from Apple would take 10 days to arrive, b) a trip to the nearest Apple Store would cost me most of a day, c) it would cost me CAD 89.00 plus tax while the third party option was half that and thanks to Amazon Prime was likely to arrive the same weekend. (Aha! Among my considerations were such elements as …. And I’m not expecting the Spanish Inquisition!! Yeah, yeah, I know—nobody expects the Spanish Inquisition-nah! Just shaddapayouface.) In fact, I’ve just now received an email saying it’s being delivered, a whole day early!

Ok, so I do have a backup from yesterday and I’ve done next to nothing since then, so never mind the back-up, let’s go for the gusto and do the installation of Big Sur.

Step two: instal the new macOS

My system informed me the download of the new OS would take two hours. Instead, it took about one.

Installation took a half hour. Then some more time once it rebooted. So in the end, maybe two hours total.

And then nothing happened. It started the reboot, and I ended up with two blanks screens.

Undecidability #3: do I do a reboot with the power button or wait? Well, waiting has worked well so far, so off to lunch and we’ll see when I get back.

Nice lunch: toasted tomato sandwiches using my tasty kalamata olive bread. Yum.

Return, check computer: nope, still two blank screens. <Insert swear words here.>⁷⁾I really just mean this for effect because in fact I did no such thing. I think I’m all out of negative emotions, having expended them the last few days already.

Shitsky, as they say in Russia. Ok, guess we’ll have to do the power button thing. Well, I don’t know whether I touched the trackpad, whether on purpose or by accident, or whether grazing the power button had the effect, but in any case, both monitors came up, and I was dazzled by Big Sur. A better name for the theme might have been Big Disappointment, but I’ll let you follow the link if you want to know what I was thinking in detail.

What if I reboot?

So now the big question is: what will happen if I shut down now, and do a reboot from off? The RAID back-up is asleep at the moment, so it will be interesting to see what happens. I’ll be back in a moment to let you know. (Thank God for ‘Save draft’!)

This is what happens

This is totally weird. (Unlike, presumably, everything I’ve said so far.)

When I shut-down, the RAID back-up drive woke up. I’ve noticed this before, but had forgotten. I guess it just makes sure there’s nothing lying around it should attend to before we go down. Well, so much for rebooting with a sleeping RAID back-up; I guess we’ll see what happens in this scenario, and I can always do it again and wait for it to go back to sleep before rebooting.

The monitor on the laptop came on. The external one did not. This is like the recent days when I’ve had trouble getting the external monitor to display; in the past, if memory serves (could be a medium-sized ‘if’), both came on immediately. Bummer. Still have the problem.

Boot up slider bar progresses—seems to take quite some time—then the screen goes blank. What?? Oh, wait—it came back … and the external monitor came on. Okaaayyyy ….

I guess I’ll shut down and wait until the RAID drive goes to sleep, and try again.

This is what happens when I wait

Only the laptop monitor comes on. There’s no flicker and then two screens. End of.

Then I had another idea. I moved the RAID drive to that adapter from the back of an Airport Extreme, whose only function was to provide a port to the RAID back-up, after my interchange with Apple about the dead back-up system. The last person I talked to told me that my set-up wasn’t supported, and the one previous to that had suggested moving it directly to the Mac; so I did that.

It solved the back-up problem … but it could be that it introduced this one. So I decided to try something.

Testing another theory

I shut off the system and made sure the RAID drive was asleep. Then I unplugged the RAID drive from the adapter. Then I rebooted.

Presto! Everything is fine. When the system was running, I plugged the RAID cable back in. RAID came to life.

So this rather suggests that there’s some contention on the port and that maybe I need to put these things on different ports.

Fortunately, the ‘spare’ multi-adapter should be here within a few hours at most, then I can test that theory. Stay tuned!

Adapting to a new adapter

It seemed to me that there could be two potential issues leading to the port problem:

Having the RAID drive and the external monitor on the same port is fundamentally a bad idea, and they should be split up, or
The adapter had somehow become wonky and wasn’t passing through signals properly.

The second theory was the simplest, since it just involved replacing the adapter without moving things around, so I tried that first.

When I shut down, the RAID drive came to life, presumably to do some kind of clean up or other. Well, fine, let me reboot and see what happens. Reboot fine, both monitors came on! Well, may as well get some work done, do a back-up. So I did.

An hour or two later, I shut down again. At same later point I came back, and the RAID drive was still sleeping, so did a reboot. Monitor came on. Ok, looks good.

This morning, same thing. Monitor came on, RAID remained asleep. Now, does that mean that the RAID is now off-line? Easy to test: perform a back-up. Did that; no problem: RAID came to life and the back-up was performed, lickety-split, as nothing much had happened since the night before.

I also noted that my cuneiform .inputplugin, which had become dysfunctional (greyed out) over the course of yesterday’s activities, is now functioning just fine.

As far as I can see, case closed.

Post-script

Nothing is ever closed in the world of computing!

As soon as I actually started to do some work, I had to open MS Word because a student had submitted a .docx file rather than a PDF. Sigh.

It crashed upon load, repeatedly; the message suggested I try to re-instal. So I did. Another 1.2 GB song-and-dance, but it’s working again now.

For now.

Notes[+]

Notes
↑1	During my last hardware debugging session, I had moved the power cable from a port on the right to a port on the left. But remembering that apparently having it on the left can result in overheating, I moved it back to the other side.
↑2	One was in my home settings, one was global; unfortunately, even though I’d saved this information, it was lost in the steps which follow.
↑3	Again, I had the code stored, but lost that ….
↑4	I will try to post on that shortly if I have the time, then come and back-fill this post with the link.
↑5	I think. Thanks to everything I’ve done since, and my poor memory, it’s hard to be sure.
↑6	I did order a replacement/spare from Amazon yesterday, for two reasons: a) an on-line order from Apple would take 10 days to arrive, b) a trip to the nearest Apple Store would cost me most of a day, c) it would cost me CAD 89.00 plus tax while the third party option was half that and thanks to Amazon Prime was likely to arrive the same weekend. (Aha! Among my considerations were such elements as …. And I’m not expecting the Spanish Inquisition!! Yeah, yeah, I know—nobody expects the Spanish Inquisition-nah! Just shaddapayouface.) In fact, I’ve just now received an email saying it’s being delivered, a whole day early!
↑7	I really just mean this for effect because in fact I did no such thing. I think I’m all out of negative emotions, having expended them the last few days already.